The program BSPFIX10 patches a problem for Bailine 
dongles that returns 'initialization error #10'.

Note! Error #10 can also be caused by other factors, 
eg. if the windows driver is not properly installed 
under windows, or if a printer is blocking the
communication between the computer and the dongle. 

Do not use this program without first checking with 
Bailine HQ.

                          ***

To run the program:

Copy both files into the directory

 c:\bailine

Start the program by typing:

 cd\bailine [Enter]
 bspfix10 [Enter]

(The program has to be run from c:\bailine)

                          ***

Any dongle connected to the Pc will be scanned and
if the dongle has a problem that causes 'error#10'
the problem will be corrected if possible.

Dongles without this problem will not be affected.

The problem can not always be corrected. A dongle 
that e.g. is electrically 'dead' will not be 
reprogrammable.

If this happens, try removing the printer cabel
from the dongle and run the program again.

A dongle that can be reprogrammed will usually get 
a new ID-number. The dongle will also return a 
new update error. The udate error can be 
circumvented by using special update codes you 
get by contacting HQ with the new ID-number.

BSP version 3.39 and later contains code that 
patches dongles with 'initialization error #10' 
automatically.